Ege Makine - Teknik Malzeme ve San. Ltd. Şti.

Ege Makine Ürünler

Calibration benches

RAD Transducer series

Torque range: 100 – 9.500 Nm

The accuracy and the repeatability of RAD Calibration benches have earned an excellent reputation in calibration laboratories around the world. The completely new RAD Calibration System was specially designed to calibrate RAD (and similar) torque wrenches. It is also possible to verify hydraulic torque wrenches accuracy with this system.


The system is available with different transducer sizes, depending on the required torque. The calibration values can be read directly from the transducer screen. In addition, the calibration values can be read and stored by linking the RAD transducer to the supplied tablet using the RAD pneumatic calibration software. The RAD Calibration System consists of a steel base plate, the transducer, the simulation joint, impact sockets and a tablet with the requisite (pre-installed) RAD pneumatic calibration software.

  • Torque range up to 9,500 Nm
  • Fully traceable calibration system, with recognized ISO 17025 calibration certificate
  • Screen on transducer makes it easy to read calibration value
  • Fast and easy link with RAD pneumatic calibration software using tablet
  • Up to 2,050 Nm classified up to BS 7882:2008 as Class 1 or better for primary torque range (+/- 0.5% of the reading from 20% to 100% of the full scale)
  • From 1,900 Nm to 9,500 Nm classified up to BS 7882:2008 as Class 0.5 or better for primary torque range (+/- 0.25% of the reading from 20% to 100% of the full scale)
  • The transducer is interchangeable with previous RAD RCA Calibration benches. Model Drive size Torque range
23442 RAD 1500 TRANSDUCER 1″ 100 – 2.000 Nm
23443 RAD 3500 TRANSDUCER 1″ 250 – 4.750 Nm
23444 RAD 7000 TRANSDUCER 1½” 475 – 9.500 Nm
Afmetingen linedrawing_transducers Model Weight Dim. A Dim. B Dim. C
23442 RAD 1500 TRANSDUCER 1,8 Kg 142 mm 60 mm 69 mm
23443 RAD 3500 TRANSDUCER 4,5 Kg 171 mm 64 mm 102 mm
23444 RAD 7000 TRANSDUCER 4,9 Kg 171 mm 64 mm 102 mm


All RAD Calibration benches include:

  • RAD Transducer
  • Steel base plate
  • Simulation joint
  • Impact sockets
  • Tablet with the RAD pneumatic calibration software
  • ISO 17025 accredited calibration certificate


RAD European 2013_V4_OMSLAG.indd


Joint Stand

Maximum torque: 6.500 Nm

The Joint Stand for the calibration of torque wrenches with the Smart Sockets™ (up to 60 mm) has a maximum capacity of 6.500 Nm. The set consists of:

  • Bench
  • Simulation joint
  • Washers

calibration_bench_jt Model Max. torque
19342 Joint Stand 6.500 Nm
Teklif almak için irtibata geçiniz.